Archives for posts with tag: diy

“You can tell who the Graphic Designer is”

This is what my neighbour yelled out to me as I was placing stencils on my green bins, branding them as my own. But its a very simple process with a really impactful result.

Bin numbers

You’ll need:

  • Printer
  • Clear contact
  • Scalpel & cutting mat
  • Tape
  • Spray paint
  • Some old newspaper for masking
Directions:
  1. Choose a font you want to put on your bin. I used Eames.
  2. Make it as big as you want & print as many copies as you intend to do (I made mine A3)
  3. Find a surface you can cut on (I have a cutting mat, however you could also use a couple of layers of cardboard).
  4. Stick your number down first. Then place your contact over the top (leaving a large area around the edge of the number if possible) and affix with tape. Since it’s clear you’ll be able to see the number underneath. Carefully cut out the number using the scalpel, trying not to cut yourself.
  5. Repeat for as many numbers as you need.
  6. Make sure your bin is as clean as possible. Remove the backing from the contact and stick on your bin.
  7. Pull up the outer edges of the contact and pop in a sheet of newspaper, because spray paint can go far!
  8. Spray away!
  9. Pull off your stencil when paint is still tacky. Otherwise your number might come off with your stencil.
  10. Enjoy knowing which bin is yours on bin night!
Advertisements

I know this idea is for weddings – but I think it could be beautiful anytime.

Found at Once Wed

What You’ll Need:
Several Canning Jars (1/2 pint wide mouth with the straight sides)
Several Handkerchiefs (in coordinating colors)
Ribbon
Bailing Wire
Rubber Bands
Flowers
Wire Cutters
Scissors
Iron and Ironing Board
Resources: Canning jars are easy to find at yard sales and thrift stores, so are handkerchiefs.    Bailing wire is available at any hardware store.
Directions:
1.  Press all of your handkerchiefs flat.  (if you’re going to be use these in a humid location, I would suggest using a little spray starch to help keep them crisp)
2. Fold the bottom of your handkerchief up (see figure 1) and the top of the handkerchief down (see figure 2) to create a band of fabric that is the same height as the jar.   Press the folds.
3.  Cut a 2 1/2 foot length of bailing wire.   Wrap it tightly around the grooves in the top of the jar,  then create a hanger.  (see figure 3)
4.  Wrap the folded handkerchief around the vase and secure it with a rubber band.  (see figure 4)
5.   Cut a length of ribbon (about 18 inches or so) and tie it around the vase to conceal the rubber band. Tie the tails in a bow.  (see figure 5)
6.  Add a little water in the bottom of your vase, insert the flowers.  ( see figure 6)
7.  Create a grouping of coordinating vases and hang from a tree, and arbor, or from the ceiling.
What it Cost:
Handkerchiefs $.25 – $3.00 each
Ribbon $.25 a yard
Bailing wire $3 for a 50 foot spool

Jars, if purchased new are about $9 for one dozen (but they are easily found for much less when used)